Description
OMPHobby M1 EVO swash leveling tool has been specially designed and printed by OriginHobbies to make it very easy for you to level the swash plate of your M1 or M1 EVO helicopter. No need to remove the head and links. It allows you to have a level swash plate and zero pitch when setting the SERVO center in the Flybarless controller settings.
NOTE: This tool is provided free with every M1 EVO Helicopter purchased from our store!
Usage instructions
- Go to SERVO setting in the Flybarless controller.
- Increase the height of the swash plate by using Elevator, Aileron and Rudder stick inputs so swash leveling tool can fit under the swash plate.
- Slide the swash leveling tool below the swash plate from the front of the helicopter. Make sure the tool is sitting flat on the bearing block.
Slowly lower the height of the swash plate by using Elevator, Aileron and Rudder stick inputs till the swash plate is sitting flush on the swash leveling tool.
Verify that the blade pitch is zero. You can do that by folding the blades to be perpendicular to the blade grips and making sure that both blade edges are parallel to each other when viewing from the side. See above picture.- IMPORTANT: Move the collective pitch stick to positive before coming out of the SERVO setting so the swash plate does not press excessively on the swash leveling tool and damage the servos.
- Enter PITCH setting. (press SET button once)
- Remove the swash leveling tool from the front.
- Save controller settings. (press and hold SET button for few seconds till it exits setup mode)
- Congratulations! You now have a perfectly level swash plate 🙂
EN 
FI 
SV 
DA 
DE 
FR
Thomas S. (verified owner) –
Not very helpful to level the rotor head
Luca C. (verified owner) –
Thanks for this. It’s useful.
Kimmo (verified owner) –
Hyvä työkalu ja vielä ilmatteeksi.
Jizhou Yang (verified owner) –
Works great with the swashplate-leveling guides on this website!
Mirko Ielmini (verified owner) –
Do 5 stelle ma non ho ancora capito a cosa serva 😅🤣
Michele (verified owner) –
Easy use for level the plate
Didier Gerber (verified owner) –
I don’t know the use of this but it’s in the package.
Anonymous (verified owner) –
Den var gratis og jeg har ikke prøvet at bruge den.
Lonoy Luc (verified owner) –
Parfait pour un réglage assez précis
Jaakko M. (verified owner) –
Jos / kun tulee säädettävää, tämä fiksu työkalu tulee varmasti tarpeeseen.
Markus L. (verified owner) –
Makes swash leveling super easy.
JESUS GONZALO (verified owner) –
Necessary tool that is free
juan carlos d. (verified owner) –
the new leveling tool is quick and easy to use. better than the old one that you have to disassemble flybarless. I send it to you for free.
Robert van Tilburg (verified owner) –
Thank you for these, the met come in handy later.
PWCJ J. (verified owner) –
No comment.
Taneli (verified owner) –
Kätevä työkalu swashin säätöön
Charles Henry (verified owner) –
it was a gift in my order which is nice because you already get a swashplate leveler in the box,a metal one,but to use it you must take the head off…with this printed one,you don’t have to…gain of time….Great!…Thank you
Calvin (verified owner) –
Like original one, good item
Dominique (verified owner) –
Très bien et reçu rapidement les pièces d origine
Andreas Schatzdorfer (verified owner) –
Kamen noch nicht zum Einsatz. Erster Eindruck nicht schlecht.
Matthias S. (verified owner) –
Easy to use without disasembling the rotor head from the main shaft.
Timo (verified owner) –
Schnelle Lieferung 5 Sterne
Günter Meyer (verified owner) –
Sehr gut, einwandfrei
Ludovic Marhem (verified owner) –
Une petite pièce qui vous facilite la vie au réglage du plateau.
Mesure confirme pour se model d’hélico M1