La description
OMPHobby M1 EVO swash leveling tool has been specially designed and printed by OriginHobbies to make it very easy for you to level the swash plate of your M1 or M1 EVO helicopter. No need to remove the head and links. It allows you to have a level swash plate and zero pitch when setting the SERVO center in the Flybarless controller settings.
NOTE: This tool is provided free with every M1 EVO Helicopter purchased from our store!
Usage instructions
- Go to SERVO setting in the Flybarless controller.
- Increase the height of the swash plate by using Elevator, Aileron and Rudder stick inputs so swash leveling tool can fit under the swash plate.
- Slide the swash leveling tool below the swash plate from the front of the helicopter. Make sure the tool is sitting flat on the bearing block.
Slowly lower the height of the swash plate by using Elevator, Aileron and Rudder stick inputs till the swash plate is sitting flush on the swash leveling tool.
Verify that the blade pitch is zero. You can do that by folding the blades to be perpendicular to the blade grips and making sure that both blade edges are parallel to each other when viewing from the side. See above picture.- IMPORTANT: Move the collective pitch stick to positive before coming out of the SERVO setting so the swash plate does not press excessively on the swash leveling tool and damage the servos.
- Enter PITCH setting. (press SET button once)
- Remove the swash leveling tool from the front.
- Save controller settings. (press and hold SET button for few seconds till it exits setup mode)
- Congratulations! You now have a perfectly level swash plate 🙂
EN 
FI 
SV 
DA 
DE 
FR
Thomas S. (client confirmé) –
Not very helpful to level the rotor head
Luca C. (client confirmé) –
Thanks for this. It’s useful.
Kimmo (client confirmé) –
Hyvä työkalu ja vielä ilmatteeksi.
Jizhou Yang (client confirmé) –
Works great with the swashplate-leveling guides on this website!
Mirko Ielmini (client confirmé) –
Do 5 stelle ma non ho ancora capito a cosa serva 😅🤣
Michele (client confirmé) –
Easy use for level the plate
Didier Gerber (client confirmé) –
I don’t know the use of this but it’s in the package.
Anonyme (client confirmé) –
Den var gratis og jeg har ikke prøvet at bruge den.
Lonoy Luc (client confirmé) –
Parfait pour un réglage assez précis
Jaakko M. (client confirmé) –
Jos / kun tulee säädettävää, tämä fiksu työkalu tulee varmasti tarpeeseen.
Markus L. (client confirmé) –
Makes swash leveling super easy.
JESUS GONZALO (client confirmé) –
Necessary tool that is free
juan carlos d. (client confirmé) –
the new leveling tool is quick and easy to use. better than the old one that you have to disassemble flybarless. I send it to you for free.
Robert van Tilburg (client confirmé) –
Thank you for these, the met come in handy later.
PWCJ J. (client confirmé) –
No comment.
Taneli (client confirmé) –
Kätevä työkalu swashin säätöön
Charles Henry (client confirmé) –
it was a gift in my order which is nice because you already get a swashplate leveler in the box,a metal one,but to use it you must take the head off…with this printed one,you don’t have to…gain of time….Great!…Thank you
Calvin (client confirmé) –
Like original one, good item
Dominique (client confirmé) –
Très bien et reçu rapidement les pièces d origine
Andreas Schatzdorfer (client confirmé) –
Kamen noch nicht zum Einsatz. Erster Eindruck nicht schlecht.
Matthias S. (client confirmé) –
Easy to use without disasembling the rotor head from the main shaft.
Timo (client confirmé) –
Schnelle Lieferung 5 Sterne
Günter Meyer (client confirmé) –
Sehr gut, einwandfrei
Ludovic Marhem (client confirmé) –
Une petite pièce qui vous facilite la vie au réglage du plateau.
Mesure confirme pour se model d’hélico M1