Description
Scorpion Backup Guard 2 is used as a stand-by power backup unit for hobby aircraft control systems (Receiver, Gyro, Servo, etc.)
How does Scorpion Backup Guard II work?
When activated, the Scorpion Backup Guard II monitors whether that the BEC output voltage on the helicopter or airplane is 5.5V or higher. If the Scorpion Backup Guard II detects a BEC failure has occured, it will take over and continue to power the radio system thus allow time for you to land your helicopter or airplane safely.
This New Backup Guard II is much stronger than its predecessor, with many new features as well!
One new extraordinary feature is the Charge Mode. This means that the Backup Guard II can charge up the Backup Battery, with balancing, while it is operating. Charging rate will be 0.5A. This means you will no longer need to charge the Backup Battery ever again!
The Backup Guard II is now only the “Power Board” and you can connect your own size of 2s LiPo with JST-XHR Connector.
The Backup Guard II provides DC 5V with 10Amp Output, which is enough to land the aircraft if the ESC/BEC has some failure.
The Second-generation of Backup Guard II has 4 LED that will indicate the status.
- Charging mode.
- BEC lower than 5.5V.
Specifications
- Weight : 10grams (without battery)
- Dimension: 44mm x 25.2mm x 10.5mm
- Li-Po input: 2S/7.4V (500~1000mah)
- Output: DC 5V / 10 Amp Continuous Current.
- Charging Plug: JST-XHR
Weight including packaging
15g
EN 
FI 
SV 
DA 
DE 
FR
Gerhard Hanssmann (verified owner) –
super Lieferung, verwendeder Akku: 3500mAh 2s Liion