Amass AS150 7mm Gold Plated Connector pair

Description

Amass AS150 7mm Gold Plated Connector pair is a high-quality gold contact system for RC Batteries. The plastic sleeves in red and black are screwed onto the plug and socket. This results in a very stable connection.

These connectors are suitable for Batteries. For Speed controller we recommend to use the AS150 anti-spark connector system.

Suitable for RC helicopters with continuous load current under 150A.

NOTE: There are 2 different types of pairs. Please choose the correct one.

1. Black Male + Red Female is usually used for the Battery
2. Red Male + Black Female is usually used for the ESC

Specification:

• Connector diameter: 7 mm
• Maximum load: 150A (200A short-term)
• Colors: red and black

Includes:

• 1 piece 7mm gold connector plug
• 1 pieces 7mm gold connector socket
• 1 piece Red Sleeve
• 1 piece Black Sleeve

Instructions:

The plug marked in yellow is the anti-spark plug. Use the anti-spark plug at the ESC end. This will reduce your overall cost as the sparking typically happens at the high voltage ESC end.

• Step 1: Pass the cable through the sleeve and solder the wire to the plug.
  
• Step 2: Tighten the plug and the sleeve.
  
• Step 3: When connecting, pay attention to the connection sequence to avoid sparks. First connect the black plugs together. Finally connect the Red plugs together to prevent sparks.