Radiomaster R86c V2 receiver airplane 6CH PWM (Frsky LBT)

Beskrivning

RadioMaster R86C V2 Receiver is a great choice if you need to drive standard servos (PWM output) from the receiver. e.g. for airplanes. It is compatible with FrSky D16 (EU LBT) protocol. It supports Return RSSI signal strength. Full range.

* Only for Multi-protocol radios. Doesn’t support Frsky transmitters.

Specifikationer

Kanaler: 6 kanaler (PWM), 9 channels (SBUS) (8 control channels + 1 return RSSI signal strength)
Frekvensområde: 2400-2483,5 Mhz
Power input range: PWM 4.5-8.4V, SBUS 4.5-6.6V
Signal format: Frsky D16 EU LBT
Utmatningsformat: PWM / SBUS
Räckvidd: mer än 1 km
Antenna length: 15cm
Size: 45*21.2*12.7mm
Weight: 8g

RSSI -utgång

Denna mottagare har totalt 6 PWM -kanaler + 9 SBUS -kanaler (Sbus har 8 kontrollkanaler + 1 RSSI -kanal). Kanaler 1-8 styrs av fjärrkontrollen, den nionde kanalen är signalstyrkan RSSI-värde som matas ut av mottagaren, vilket kan  läsas av olika flygkontroller och skickas till OSD för att visa signalstyrka i FPV -videoflöde.

Binding Instructions

1. Turn on your transmitter and select the correct protocol for the Multi-Protocol Module.
   
   • Mode: Multi, FrskyX
   • RF Protocol: LBT(EU)
2. Please keep the Transmitter at least a few feet away from the Receiver.
3. Enter bind mode on the receiver. Press and hold the bind button while powering on the receiver. Red LED will be blinking slowly to indicate binding mode.
   
4. Press bind on the transmitter. Select “Ch 1-8 Telem ON”
   
5. The light will flash rapidly then blink slowly and finally turn steady ON. This completes binding procedure.
   
6. Power OFF and power ON the receiver after binding.

Inkluderar

• R86C V2 Standard receiver
• Bruksanvisning

Nedladdningar

• R86C V2 User manual