La description
L'hélicoptère RC M4 d'OMPHobby est le dernier hélicoptère de taille 380 d'OMPhobby conçu par Jonas Wackershauser.
- This is a Kit version and requires assembly. Please refer to our OMP M4 build guide.
- For custom combo please see M4 Custom Combo kit.
NOTE: Please check out M4 Custom PNP Combo
ATTENTION! Il ne s'agit pas d'un jouet. Une utilisation incorrecte peut entraîner des blessures graves. Il est recommandé d'utiliser un simulateur RC avant d'essayer de faire voler ce modèle. Ne convient pas aux enfants.
Lire plus!
Comprend
- M4 RC Helicopter Airframe Kit (Requires Assembly)
- Brushless Motor: Sunnysky V8108KV: 205
- 385mm RotorTech 385 Ultimate Main Rotor Blades
- 71mm Tail Rotor blades
- 3x Cyclic Servos 12mm, 1x Tail servo 12mm
- 1x ESC 65A Supports telemetry for Vbar Control, MSH Brain2, Spirit, RotorFlight and Futaba S-BUS2.
- 1x OriginHobbies swash leveling tool
Composants nécessaires
- 1x Flybarless controller [e.g. MSH Brain2 / Vbar / Radiomaster NEXUS / BeastX / Bavarian Demon / Spirit]
- 1x Radio Transmitter (6-channel or more) [e.g. Radiomaster TX16S / TX12 / Boxer / Zorro]
- 1x Radio Receiver (6-channel or more) [e.g. Frsky R-XSR]
- 1x LiPo Battery: 6S 1800mAh-2200mAh. Recommended battery weight: 295-325g
- for extreme 3D: OMP 2000mAh 6S1P HV
- for extreme 3D: SLS Quantum 1800mAh 6S1P
- for sport / smooth 3D: SLS XTRON 2200mAH 6S1P
Vidéos
~10 minutes low RPM flight with SLS Quantum 1800mAh 6S 65C
Caractéristiques et design
- Designed by Jonas Wackershauser
- RotorTech 385 Ultimate, the best performing 380 size blade on the market, included as the standard blade
- Large, powerful direct drive main motor
- Large pitch range main rotor design for extreme control power in any situation, ±14° collective pitch with ±14° cyclic pitch possible
- Flying weight: appx. 1350g (with 6S 2000mAh HV Lipo)
- Excellent main and tail blade grip guidance through radial-axial-radial bearing arrangement
- M2.5 screws used in most places across the frame for excellent durability, serviceability and crash resistance
- Belt driven tail rotor. 71mm tail blades.
- High precision, long throw tail mechanics for easy setup, precise control and virtually unlimited tail power
- Tail rotor drive ratio: 4.5:1
- Robust and durable 8mm main shaft, 5mm spindle shaft and 5mm tail shaft
- Compact and symmetric servo layout for easy access and excellent flight performance
- Ample gyro mount space to accept variety of Flyberless Gyro controllers.
- Sacrificial canopy holders with replaceable beams
- Extremely rigid, teardrop shaped tail boom
- Large battery space under the canopy, 6S 1800mAh-2200mAh possible. Recommended battery weight: 295-325g
- Removable Battery Tray system
- XT60 connector frame mount for easy battery connection
- OMPHobby 71mm tail rotor blade is constructed from sturdy, fiberglass re-in-forced plastic making it highly resistant to impact damage.
- The tail blade’s paint scheme enhances the helicopter’s visibility and aesthetics during flight.
Téléchargements
Brain2 / Vbar EVO – controller settings for OMP M4 Helicopter
EN 
FI 
SV 
DA 
DE 
FR
yoeri (client confirmé) –
The thrustbearing was missing in the kit but after a quick message to origin they replied quickly over the weekend saying they would ship it out on monday, (which they did) It’s been installed and 4 packs have been used so far
Lars Bexander (client confirmé) –
Tyvärr var spindelaxeln till tailen felaktig där av 4 stjärnor, men reklamasionen hanterades snabt och uta krångel