La description
OMPHobby M4 Max is based on the proven M4 air-frame with all its beloved features. Swinging 420mm blades, the MAX brings much lower disc loading enabling smoother and more dynamic flying styles with a much floatier feeling.
NOTE: Please see M4 Max Custom PNP Combo for recommended components!
ATTENTION! Il ne s'agit pas d'un jouet. Une utilisation incorrecte peut entraîner des blessures graves. Il est recommandé d'utiliser un simulateur RC avant d'essayer de faire voler ce modèle. Ne convient pas aux enfants.
Lire plus!
Comprend
- M4 Max RC Helicopter Airframe Kit (Requires Assembly)
- Brushless Motor: Sunnysky V8110KV: 185
- 420mm RotorTech 420 Ultimate Main Rotor Blades
- 71mm Tail Rotor blades
- Amass MR60-F and XT60E-M connectors for ESC
- OriginHobbies swash leveling tool
- Instruction Manual
Composants nécessaires
-
- 1x ESC: 80A+ ESC [e.g. Scorpion Tribunus iii 06 80A, OMP 85A ESC]
- 3x Cyclic Servos, 12mm [e.g. OMP DS2312C/ KST DS215MG]
- 1x Tail Servo, 15mm [e.g. OMP DS3515 / KST DS565X] or 12mm [e.g. OMP DS2312T / KST DS215MG]
- 1x Flybarless controller [e.g. MSH Brain2 / Vbar EVO / Radiomaster NEXUS /BeastX / Bavarian Demon / Spirit]
- 1x Radio Transmitter (6-channel or more) [e.g. Radiomaster TX16S / TX12 / Boxer / Zorro / Mikado VBar Control]
- 1x Radio Receiver (6-channel or more) [e.g. Frsky R-XSR]
- 1x LiPo Battery: 6S 1800mAh-2200mAh. Recommended battery weight: 295-325g
- for extreme 3D: Gens Ace 2000mAh 6S1P HV
- for sport / smooth 3D: SLS XTRON 2200mAH 6S1P / Gens Ace 2500mAh 6S1P
- Long flights:
- 1x ESC: 80A+ ESC [e.g. Scorpion Tribunus iii 06 80A, OMP 85A ESC]
Vidéos
Caractéristiques et design
- Designed by Jonas Wackershauser
- Based on the proven M4 airframe with all its beloved features
- Fits up to 420mm main blades
- Three new, tri-colored, highly visible canopy designs
- RotorTech 420 Ultimate, the best 420 size blade available, included with Kit and PNP
- New, over 30% larger R80-7 main motor to properly drive the larger main blades
- Large 22mm diameter carbon fiber tail boom
- Single-piece, lightweight CNC-machined aluminium tail rotor housing
- 5mm wide tail belt for excellent power transfer
- Tail rotor features dynamic weights to reduce yaw servo loads
- Teal accents on white landing gear, carbon boom and tail fin to match all three new canopies
- Optional OMPHOBBY DS3515T 15mm yaw servo available
- Certain battery sizes can be shared with M4
- Flight times 3-15 minutes on 6S 2000mAh 70C
- New OMPHOBBY 85A ESC in the PNP combo
- Flying weight appx. 1500g
Size
EN 
FI 
SV 
DA 
DE 
FR
Joni K. (client confirmé) –
Easy to assemble, a light heli for the blade size. The ball joint links are from softer plastic than other brands; if tightened at a slight angle, they can break. There are no extra ball joint links in the kit.
Ruben V. (client confirmé) –
Amazing heli that came together like a dram. Flies very well. One note of you do not use the stock 35mm tail servo but one that doesn’t have a center hole for mounting the servo (in the little tabs on the servo itself) you will need 4 button head screws that fit.
Giuseppe Nodari (client confirmé) –
Toppppppppppppppppppp