Kuvaus
OMPHobby M4 RC-helikopteri on OMPhobbyn uusin 380-kokoinen helikopteri, jonka on suunnitellut Jonas Wackershauser.
This is a Kit version and requires assembly. Please refer to our OMP M4 build guide.
VAROITUS! Tämä ei ole lelu. Vääränlainen käyttö voi aiheuttaa vakavia vammoja. RC-simulaattoriharjoittelua suositellaan ennen kuin yrität lentää tätä mallia. Ei sovellu lapsille.
Lue lisää!
Sisältää
- M4 RC Helicopter Airframe Kit (Requires Assembly)
- Brushless Motor: Sunnysky V8108KV: 205
- 385mm RotorTech 385 Ultimate Main Rotor Blades
- 71mm Tail Rotor blades
- 3x Cyclic Servos 12mm, 1x Tail servo 12mm
- 1x ESC
- 1x Originhobbies Swash leveling tool
Tarvittavat komponentit
- 1x Flybarless controller [e.g. MSH Brain2 / Vbar / Radiomaster NEXUS /BeastX / Bavarian Demon / Spirit]
- 1x Radio Transmitter (6-channel or more) [e.g. Radiomaster TX16S / TX12 / Boxer / Zorro]
- 1x Radio Receiver (6-channel or more) [e.g. Frsky R-XSR]
- 1x LiPo Battery: 6S 1800mAh-2200mAh. Recommended battery weight: 295-325g
- for extreme 3D: OMP 2000mAh 6S1P HV
- for extreme 3D: SLS Quantum 1800mAh 6S1P
- for sport / smooth 3D: SLS XTRON 2200mAH 6S1P
Videot
~10 minutes low RPM flight with SLS Quantum 1800mAh 6S 65C
Ominaisuudet & Design
- Designed by Jonas Wackershauser
- RotorTech 385 Ultimate, the best performing 380 size blade on the market, included as the standard blade
- Large, powerful direct drive main motor
- Large pitch range main rotor design for extreme control power in any situation, ±14° collective pitch with ±14° cyclic pitch possible
- Flying weight: appx. 1350g (with 6S 2000mAh HV Lipo)
- Excellent main and tail blade grip guidance through radial-axial-radial bearing arrangement
- M2.5 screws used in most places across the frame for excellent durability, serviceability and crash resistance
- Belt driven tail rotor. 71mm tail blades.
- High precision, long throw tail mechanics for easy setup, precise control and virtually unlimited tail power
- Tail rotor drive ratio: 4.5:1
- Robust and durable 8mm main shaft, 5mm spindle shaft and 5mm tail shaft
- Compact and symmetric servo layout for easy access and excellent flight performance
- Ample gyro mount space to accept variety of Flyberless Gyro controllers.
- Sacrificial canopy holders with replaceable beams
- Extremely rigid, teardrop shaped tail boom
- Large battery space under the canopy, 6S 1800mAh-2200mAh possible. Recommended battery weight: 295-325g
- Removable Battery Tray system.
- XT60 connector frame mount for easy battery connection
- OMPHobby 71mm tail rotor blade is constructed from sturdy, fiberglass re-in-forced plastic making it highly resistant to impact damage.
- The tail blade’s paint scheme enhances the helicopter’s visibility and aesthetics during flight.
Lataukset
Brain2 / Vbar EVO – controller settings for OMP M4 Helicopter
EN 
FI 
SV 
DA 
DE 
FR
Giuseppe Nodari (varmistettu kirjoittaja) –
Fantastico……………………….