Beschreibung
Xnova lightning 4530-525KV high performance outrunner motor has been specially designed for designed for extreme 3D flying in 690-770mm helicopter where highest power to weight ratio is important. Recommended for specially 12S.
Suitable for OMPHobby M7 and SAB ILGoblin PRO 700.
The Xnova V3 lightning series is the highest level of motor performance money can buy nowadays.
Highlights
- Improved higher efficiency with thinner stator lamination, designed with integrated cooling system resulting in lower temperature.
- Increased power output by the use of thicker hand wound YY single strand copper wires, heat resistant up to 300 degrees C.
- High-performance neodymium magnets, heat resistant up to 180 degrees C.
- All other features same as XTS series.
Spezifikationen
| Motor Kv | 525KV RPM/Volt |
| Weight | 565g |
| Motor Body Dimensions (no shaft) | 55.7mm x 60.5mm |
| External Shaft Dimensions | 6mm x 38mm |
| Continuous Current | 130Amps |
| Continuous Power | 5100 Watts |
| Peak Power | 11000 Watts (2 seconds) |
| Max Lipo Cell* | 12s |
| No. of Slots | 12 |
| No. of Poles | 10 |
| Motor Wind T | 4+5 YY with 1.6mm thick wire |
| Mounting Screws | 4*30*M4 |
EN 
FI 
SV 
DA 
DE 
FR
Rezensionen
Es gibt noch keine Rezensionen.