Beschreibung

ToolkitRC ADP750 V2 is a switched-mode 12V DC power supply with a current capacity of up to 62.5A, suitable for powering high-performance DC chargers and charging stations at races or in the workshop. It is powered directly from 100-240V mains and delivers continuous power of up to 750W, allowing full use of the charging power of the ToolkitRC M8D charger or any other Charger with DC input.

The power supply has a total of 7 outputs that can be used simultaneously: 3x XT60 (male) for direct charger connection, 2 sets of 4mm banana sockets and two USB ports — USB-C with PD 3.0 und USB-A with QC 2.0, each with up to 30W output, suitable for charging a transmitter, FPV goggles or phone. Both XT60 and 4mm outputs are rated for 30A. Cooling is provided by a fan with automatic speed control based on load. The power supply is protected against short circuit, overcurrent, overload, overheating and overvoltage. The 12V output is switched on using a front-panel switch. Dimensions are 227×90.2×42.4mm and weight is 1050g, with an operating range of -10 to 40°C. In addition to the mains cable, the package includes three connection cables: XT60-XT60, a two XT60 to one XT90 adapter, and an XT60 to 4mm banana plug cable.

Key Features

Maximum power: 750W
Output voltage: 12V DC
Output current: up to 62.5A

USB-C output: PD 3.0, 5V/9V 3A, 12V 2.5A (max 30W)
USB-A output: QC 2.0, 5V/9V 3A, 12V 2.5A (max 30W)
Output connectors: 3x XT60 Male (max 30A), 2x set of 4mm banana sockets (max 30A)