Beskrivning
OMPHobby M4 RC Helicopter är den senaste helikoptern i 380-format från OMPhobby designad av Jonas Wackershauser.
- This is a Kit version and requires assembly. Please refer to our OMP M4 build guide.
- För rekommenderade komponenter se M4 PnP Combo kit.
VARNING! Detta är ingen leksak. Felaktig användning kan leda till allvarlig skada. RC-simulatorövning rekommenderas innan du försöker flyga denna modell. Inte lämplig för barn.
Läs mer!
Inkluderar
- M4 RC Helicopter Airframe Kit (Requires Assembly)
- Brushless Motor: Sunnysky V8108KV: 205
- 385mm RotorTech 385 Ultimate Main Rotor Blades
- 71mm Tail Rotor blades
- XT60E-M ESC connector for battery
- MR60-F ESC connector for motor
- 1x OriginHobbies swash leveling tool
Komponenter som krävs
- 3x Cyclic Servos, 12mm [e.g. OSHM4004, KST DS215MG]
- 1x Tail Servo, 12mm or 15mm [e.g. OSHM4013, KST DS215MG / KST DS565X]
- 1x ESC: 60A+ ESC [e.g. Scorpion Tribunus 06 80A, OMP M4 65A ESC, Hobbywing Platinum Pro 60A]
- 1x Flybarless controller [e.g. MSH Brain2 / Vbar / Radiomaster NEXUS / BeastX / Bavarian Demon / Spirit]
- 1x Radio Transmitter (6-channel or more) [e.g. Radiomaster TX16S / TX12 / Boxer / Zorro]
- 1x Radio Receiver (6-channel or more) [e.g. Frsky R-XSR]
- 1x LiPo Battery: 6S 1800mAh-2200mAh. Recommended battery weight: 295-325g
- for extreme 3D: OMP 2000mAh 6S1P HV
- for extreme 3D: SLS Quantum 1800mAh 6S1P
- for sport / smooth 3D: SLS XTRON 2200mAH 6S1P
videoklipp
~10 minutes low RPM flight with SLS Quantum 1800mAh 6S 65C
Funktioner och design
- Designed by Jonas Wackershauser
- RotorTech 385 Ultimate, the best performing 380 size blade on the market, included as the standard blade
- Large, powerful direct drive main motor
- Large pitch range main rotor design for extreme control power in any situation, ±14° collective pitch with ±14° cyclic pitch possible
- Flying weight: appx. 1350g (with 6S 2000mAh HV Lipo)
- Excellent main and tail blade grip guidance through radial-axial-radial bearing arrangement
- M2.5 screws used in most places across the frame for excellent durability, serviceability and crash resistance
- Belt driven tail rotor. 71mm tail blades.
- High precision, long throw tail mechanics for easy setup, precise control and virtually unlimited tail power
- Tail rotor drive ratio: 4.5:1
- Robust and durable 8mm main shaft, 5mm spindle shaft and 5mm tail shaft
- Compact and symmetric servo layout for easy access and excellent flight performance
- Ample gyro mount space to accept variety of Flyberless Gyro controllers.
- Sacrificial canopy holders with replaceable beams
- Extremely rigid, teardrop shaped tail boom
- Large battery space under the canopy, 6S 1800mAh-2200mAh possible. Recommended battery weight: 295-325g
- Removable Battery Tray system
- XT60 connector frame mount for easy battery connection
- OMPHobby 71mm tail rotor blade is constructed from sturdy, fiberglass re-in-forced plastic making it highly resistant to impact damage.
- The tail blade’s paint scheme enhances the helicopter’s visibility and aesthetics during flight.
Nedladdningar
Brain2 / Vbar EVO – controller settings for OMP M4 Helicopter
EN 
FI 
SV 
DA 
DE 
FR
DAVID (verifierad ägare) -
TOP! site très sérieux !
Anonym (verifierad ägare) -
Overall, I am very satisfied.
The bearings of the blade holders were pre-assembled far too tightly, and therefore could only be loosened with great difficulty and considerable force.
Balázs Nerpel (verifierad ägare) -
Would give 6 stars if possible.
Very good quality parts and finish, build was super easy as the setup.
Giuseppe Nodari (verifierad ägare) -
Fantastico …………………..
Giuseppe Nodari (verifierad ägare) -
Topp tutto perfetto. ……
Petr Paril (verifierad ägare) -
A precision machine. I recommend.