Beskrivning
The V2 version of this 40mm Cooling fan, is the same as our original version, but not comes with a built in Y adapter for easier connection to your Tribunus ESCs. This a very powerful cooling fan for the Tribunus 200/300 series ESCs. Scorpion Hi-Speed Cooling Fan (40mm) V2 has a machined Aluminum alloy case, and it can deliver excellent cooling power for your ESC. It increases air flow to heat sensitive components thus reducing degradation to help extend the life span of your ESC. It is suitable for Tribunus 14-200A, II 14-200A, II+ 14-200A , 14-300A, & II+ 14-300A ESC.
Simply plug the Male Housing Servo plug into the PC port of your Tribunus ESC, then on the other end with the Female Housing Servo Plug connect it back into your existing telemetry cable, which automatically locks due to the locking tab on the plastic housing.
OBS: It is not recommended to use this 40mm Hi-Speed cooling fan with the Scorpion Tribunus III Temperature controlled fan port! This is due to too high current draw from the HI-SPEED fan. If using with Scorpion Tribunus III ESC, then you should power via the Master / Slave / PC port which have higher current rating, but do not connect to the FAN port.
Review by Kyle Dahl
NOTE: Video shows V1 cooling fan, which does not have integrated Y connector. Cabling with V2 cooling fan is now different.
Specifikationer
- Length : 40mm (1.57″)
- Width : 40mm (1.57″)
- Thickness : 10.6mm (0.42″)
- Weight : 22g
- Fan Speed 8.4V : 15000 RPM
Weight including packaging
32g
EN 
FI 
SV 
DA 
DE 
FR
Guido Smitsmans (verifierad ägare) -
Vielleicht etwas teuer aber passt gut zum Regler und is kwalitativ gut.