Description
OMPHobby M4 swash leveling tool has been specially designed and printed by OriginHobbies to make it very easy for you to level the swash plate of your M4 helicopter. No need to remove the head and links. It allows you to have a level swash plate and zero pitch when setting the SERVO center in the Flybarless controller settings.
The tool works for M4 as well as M4 MAX.
Usage instructions
- Go to SERVO setting in the Flybarless controller.
- Increase the height of the swash plate by giving positive collective input so swash leveling tool can fit under the swash plate.
- Slide the swash leveling tool below the swash plate from the front of the helicopter. Make sure it is sitting flat on the bearing block
- Bring collective pitch back to center. Adjust servo trim in flybarless controller to have 90degrees servo arms. Adjust servo links length so that swash plate is sitting perfectly on the swash plate leveling tool. Notice that the swash washout arms are leveled out. (green line in picture). This will ensure that you have symmetric positive and negative collective pitch.
- Adjust blade links so that blade pitch is zero. You can do that by folding the blades to be perpendicular to the blade grips and making sure that both blade edges are parallel to each other when viewing from the side. See below picture.
- IMPORTANT: Move the collective pitch stick to positive before coming out of the SERVO setting so the swash plate does not press excessively on the swash leveling tool and damage the servos.
- Remove the swash leveling tool from the front.
- Save FBL controller settings.
- Congratulations! You now have a perfectly level swash plate 🙂
EN 
FI 
SV 
DA 
DE 
FR
Mykola C. (client confirmé) –
Very good quality, I recommend it
ARISTEIDIS M. (client confirmé) –
Useful tool! Needs this for setup!
arismavrom (client confirmé) –
Very nice and useful tool!
Joni K. (client confirmé) –
Nice extra included with heli kit
Anonyme (client confirmé) –
Overall, I am very satisfied
Joakim (client confirmé) –
Drog min kablar så den ej kunde användas . Dock inte produktens fel.
Fin kvalitet och bra pris.
Aldo Russotto (client confirmé) –
Très content de votre société
Ruben V. (client confirmé) –
Great free gift that makes leveling the swash and setting 0 pitch a lot easier.
Philip V. (client confirmé) –
looks good and color adapted to the m’ max
yoeri (client confirmé) –
Good quality 3D printed part a must for setting up your M4 (if you’re not comfortable doing it by eye yet)
Walter (client confirmé) –
Tool is for MP4 very helpful
Giuseppe Nodari (client confirmé) –
Toppppppppppppppppppp
Giuseppe Nodari (client confirmé) –
Fantastico …………………..
Jaakko Menander (client confirmé) –
This tool is pure genius!
Anonyme (client confirmé) –
Beautiful and works well
Lars Bexander (client confirmé) –
fDen är praktisk och fungerar fint