Amass AS150 7mm Gold Plated Anti Spark Connector set 150A – MT1451

Description

Amass AS150 7mm Gold Plated Anti Spark Connector set is a high-quality gold contact system that has a resistor integrated into the plug that prevents Sparking when connecting the battery to the speed controller. The plastic sleeves in red and black are screwed onto the plug and socket. This results in a very stable connection.

Suitable for 600 and 700 class helicopters with continuous load current under 150A.

Spécification:

• Connector diameter: 7 mm
• Maximum load: 150A (200A short-term)
• Colors: red and black

Includes:

• 1 piece 7mm anti-spark gold connector plug – the built-in resistor has 5.6 ohms resistance
• 1 piece 7mm gold connector plug
• 2 pieces 7mm gold connector socket
• 2 pairs of red + black plastic sleeves

Instructions:

The plug marked in yellow is the anti-spark plug. Use the anti-spark plug at the ESC end. This will reduce your overall cost as the sparking typically happens at the high voltage ESC end.

• Step 1: Pass the cable through the sleeve and solder the wire to the plug.
  
• Step 2: Tighten the plug and the sleeve.
  
• Step 3: When connecting, pay attention to the connection sequence to avoid sparks. First connect the black plugs together. Finally connect the Red plugs together to prevent sparks.