KST Servo Programming Tool Card #3 for KST Servos KST-6003

Beskrivelse

KST Servo Programming Tool Card #3 – A programming device for KST V3.0, V6.0 and V8.0 servos, it is a very useful tool that makes it possible to not only change the frequency of the servo but also to set the neutral position which likewise adjusts the full travel. This gives the ultimate perfect centering of the servo, a handy tool!

Compatible Servos

KST V3.0, V6.0 and V8.0 Servos. NOTE: Not Suitable for KST DS215 V3.0

 

Operating instructions for KST Servo Programming Tool Card #3

1. Connect the device to a 6-9V power supply, and the frequency indicators will start to flash.
2. Connect the servo to the upper servo port. The device will detect the servo frequency and illuminate the corresponding frequency indicator light.
3. Setting the Servo Frequency: Press the toggle frequency button to switch between frequencies (1520uS / 760uS). Press enter to select the frequency of the servo in use. If you do not want to change the servo frequency you still need to press the Enter button to save the currently selected frequency and move to Center position setting.
4. Setting the Center Position: Use the dial to set the desired new center position. Press “Enter” to save the new center position.

Resetting to Factory setting: Press down on the “Neutral set” dial to reset the device to factory setting.

 

Videoer

How to use the programming tool #3, Check the video on 05:27 to know how to use our Servo Programming Tool #3.

Package Includes

Download

• KST Servo Programming Tool Card #3 User Manual – German