030118 – Gaui X3L Helicopter Kit (385L)

Beskrivelse

Gaui X3L Helicopter Kit (385L) – 030118

The Gaui X3L is an updated version of Gaui X3 with below updates:

• Newer frame to allow for larger motor and batteries.
• Belt driven tail. Allows to use up to 385mm main blades.
• New Canopy design and tail boom cover.

Content:

• X3L Basic Kit(385L) x 1 set
• Tail Rotor Blade Set(62mm) x 1 set

Specifikationer:

• Overall Length (with Canopy): 709mm
• Main rotor diameter: 808mm (Main Blades 360mm) 858mm (Main Blades 385mm)
• Main blade length: 360~385 mm
• Overall Height: 212mm
• Overall Width: 87.8mm
• Tail Blade Length: 62 mm
• Tail Rotation Diameter: 164mm
• ESC: Minimum 50A ESC
• LiPo battery: 6S1P 1000~ 1800 mAh
• BL Motor : 2520 / 3226
• Total weight: 515g ±3% (kit with canopy,w/o all electronics, blades and batteries.)

Required For Operation

• Main Rotor blades [e.g. Align HD380 Blades]
• Motor [e.g. Scorpion HK-2520 -1580kV 3.5mm shaft]
• Pinion Gear [e.g. Gaui 13T steel pinion]
• CCPM Mini servo x3pcs [e.g. KST DS215MG v3 x3 bundle]
• Tail Specialized Servo x1pc [e.g. KST DS565X]
• ESC: 40A+ ESC recommended [e.g. Hobbywing Platinum Pro 60A eller Scorpion Tribunus 06 80A]
• Flybarless controller x1 pc [e.g. MSH Brain2]
• Transmitter (6-channel or more, helicopter system) [e.g. Radiomaster TX16S]
• Receiver (6-channel or more) [e.g. Radiomaster R81]
• LiPo Battery size: 110 x 34 x 34mm (3S & 6S) [e.g. Gens Ace 1450mAh 22.2V 45C 6S1P]

Tools and Equipment for Assembly

• • 1.5 mm Hexagon Screw Driver [e.g. PB Swiss Tools 1.5mm Hex driver]
  • 2 mm Hexagon Screw Driver [e.g. PB Swiss Tools 2mm Hex driver]
  • 2.5 mm Hexagon Screw Driver [e.g. PB Swiss Tools 2.5mm Hex driver]
  • Philips Screw Driver [e.g. RnD Labs PH0 Philips driver]
  • Lubricant / one-way bearing grease [e.g. Gaui 666200 grease]
  • Digital calipers [e.g. RCWare Digital caliper]
  • Needle-nosed pliers
  • General thread lock [e.g. Gaui 666302 thread lock glue]

Downloads

• Brugermanual