Mikado Power Backup, VBar Control 05584

Beskrivelse

Mikado Power Backup provides seamless integration with the VBar Control eco system to give you full control and telemetry at your VBar Control.

Benefits at a glance

• automatic activation and deactivation, depending on the operational status of the model (motor switch position, stick inputs)
• all voltages can be monitored separately via telemetry
• charging currents are adjustable, both for initial charging and for topping-up during operation
• recharges automatically and immediately whenever needed
• companion App warns the pilot whenever the backup is used
• this unit ensures the everyday operation of your valuable models

Hardware features

• wide input voltage range from 3 V up to 12.6 V (3s LiPo) with a 16 V peak margin
• Capacity 3 x 50 F, 40+ A peak current
• short circuit protection
• fast charge (adjustable) up to 2.4 A
• charging current is ramped up slowly, to protect main power supply
• decoupled channels for power delivery and for charging
• VLink Telemetry monitoring and control
• no r/c channel (servo connector) must be sacrificed, pass-through via main connector
• active balancer between capacitors for low idle discharge
• up to 3 units can be connected parallel, tripling the capacity and power; cascaded units are fully suported by companion App
• telemetry input for other sensors or ESCs (daisy-chaining)

specifikationer

Power Supply	3-12.6 V (3s LiPo), max. 16 V
Dimensions	approx. 48 x 55 x 19 mm (H x W x D)
Weight	approx. 52 g including wires
Power Rating	Capacity 3 x 50 F, 40+ A peak

Inkluderer

Device	VBar Control Power Backup w/ power wire, manual
Connecting Wire	Telemetry wire included

Hardware Requirements

• Vbar Control : Update VBar NEO, install companion App on transmitter

Downloads

• Power Backup, Vbar Conrol User Manual (EN + DE)