{"id":3789,"date":"2022-06-19T20:15:43","date_gmt":"2022-06-19T18:15:43","guid":{"rendered":"http:\/\/originhobbies.com\/?page_id=3789"},"modified":"2025-11-23T15:29:56","modified_gmt":"2025-11-23T13:29:56","slug":"tx16s-radio-setup-for-omphobby-m1-m2-opentx-edgetx","status":"publish","type":"page","link":"https:\/\/originhobbies.com\/da\/tx16s-radio-setup-for-omphobby-m1-m2-opentx-edgetx\/","title":{"rendered":"TX16S EdgeTX Radio setup for OMPHobby M1, M2, M2 v3 Pro"},"content":{"rendered":"<p>This guide will show you how to setup your Radiomaster TX16S or any EdgeTX \/ OpenTX Multi-protocol radio for your OMPHobby M1 or M2 Helicopter.<\/p>\n\n\n\n<p>If you purchased a RTF Combo or TX16S Radio from us, this setup is already done for you.<\/p>\n\n\n\n<p>If you are using OpenTX we recommend that you upgrade your TX16S to EdgeTX.<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"1000\" height=\"775\" src=\"https:\/\/originhobbies.com\/wp-content\/uploads\/2025\/11\/TX16S-MARK-II-closeup-e1763904446106.jpg\" alt=\"\" class=\"wp-image-21586\" srcset=\"https:\/\/originhobbies.com\/wp-content\/uploads\/2025\/11\/TX16S-MARK-II-closeup-e1763904446106.jpg 1000w, https:\/\/originhobbies.com\/wp-content\/uploads\/2025\/11\/TX16S-MARK-II-closeup-e1763904446106-300x233.jpg 300w, https:\/\/originhobbies.com\/wp-content\/uploads\/2025\/11\/TX16S-MARK-II-closeup-e1763904446106-768x595.jpg 768w, https:\/\/originhobbies.com\/wp-content\/uploads\/2025\/11\/TX16S-MARK-II-closeup-e1763904446106-50x39.jpg 50w, https:\/\/originhobbies.com\/wp-content\/uploads\/2025\/11\/TX16S-MARK-II-closeup-e1763904446106-15x12.jpg 15w, https:\/\/originhobbies.com\/wp-content\/uploads\/2025\/11\/TX16S-MARK-II-closeup-e1763904446106-416x322.jpg 416w\" sizes=\"auto, (max-width: 1000px) 100vw, 1000px\" \/><\/figure>\n<\/div>\n\n\n<h3 class=\"wp-block-heading\">EdgeTX model configuration files<\/h3>\n\n\n\n<h4 class=\"wp-block-heading\">Download<\/h4>\n\n\n\n<ul class=\"wp-block-list\">\n<li><span><a style=\"font-weight: bold;\" href=\"https:\/\/originhobbies.com\/wp-content\/uploads\/2025\/11\/OriginHobbies_TX16S_4in1_v8.3.etx_.zip\">TX16S 4in1 EdgeTX Model Configuration File<\/a><\/span><\/li>\n\n\n\n<li><span><a href=\"https:\/\/originhobbies.com\/wp-content\/uploads\/2025\/11\/OriginHobbies_TX16S_ELRS_v1.0.etx_.zip\"><strong>TX16S ELRS EdgeTX Model Configuration File<\/strong><\/a><\/span><\/li>\n<\/ul>\n\n\n\n<h4 class=\"wp-block-heading\">Model names in Configuration file<\/h4>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>Model Name<\/th><th>Model<\/th><th>Modtager<\/th><th>Protocol<\/th><\/tr><tr><td>M1,M2 SFHSS<\/td><td>M1 EVO &amp; M2 EVO<\/td><td>Built-in \/ <a href=\"https:\/\/originhobbies.com\/da\/shop\/radio-control\/radio-receivers\/oshm2055-omp-m2-m1-futaba-satellite-receiver-futaba\/\">OSHM2055<\/a><\/td><td>S-FHSS<\/td><\/tr><tr><td>M1,M2 DSM<\/td><td>M1 EVO &amp; M2 EVO<\/td><td><a href=\"https:\/\/originhobbies.com\/da\/shop\/radio-control\/radio-receivers\/kensun-dsm2-dsmx-nano-satellite-receiver-with-bind-button\/\">DSM nano Satellite<\/a><\/td><td>DSM \/ DSM2 \/ DSMx<\/td><\/tr><tr><td>M1,M2 OMP<\/td><td>M1 EVO &amp; M2 EVO<\/td><td>Built-in<\/td><td>OMP<\/td><\/tr><tr><td>OFS3 SFHSS<\/td><td>M2 V3 PRO &amp; M2 EVO MK2<\/td><td> <a href=\"https:\/\/originhobbies.com\/da\/shop\/radio-control\/radio-receivers\/oshm2055-omp-m2-m1-futaba-satellite-receiver-futaba\/\">OSHM2055<\/a><\/td><td>S-FHSS<\/td><\/tr><\/thead><\/table><figcaption class=\"wp-element-caption\">Models in OriginHobbies TX16S 4in1 configuration file<\/figcaption><\/figure>\n\n\n\n<figure class=\"wp-block-table\"><table class=\"has-fixed-layout\"><thead><tr><th>Model Name<\/th><th>Model<\/th><th>Modtager<\/th><th>Protocol<\/th><\/tr><tr><td>M1,M2 ELRS<\/td><td>M1, M2, M1 EVO &amp; M2 EVO<\/td><td><a href=\"https:\/\/originhobbies.com\/da\/shop\/radio-control\/radio-receivers\/radiomaster-rp2-v2-elrs-2-4ghz-nano-receiver-lbt-for-omp-ofs3\/\">XR2<\/a><\/td><td>ELRS<\/td><\/tr><tr><td>OFS3 ELRS<\/td><td>M2 V3 PRO &amp; M2 EVO MK2<\/td><td><a href=\"https:\/\/originhobbies.com\/da\/shop\/radio-control\/radio-receivers\/radiomaster-rp2-v2-elrs-2-4ghz-nano-receiver-lbt-for-omp-ofs3\/\">XR2<\/a><\/td><td>ELRS<\/td><\/tr><\/thead><\/table><figcaption class=\"wp-element-caption\">Models in OriginHobbies TX16S ELRS configuration file<\/figcaption><\/figure>\n\n\n\n<h4 class=\"wp-block-heading\">Loading Models from configuration file to Radio<\/h4>\n\n\n\n<ol class=\"wp-block-list\">\n<li>Download and install <a href=\"https:\/\/github.com\/EdgeTX\/edgetx\/releases\/latest\" rel=\"nofollow noopener\" target=\"_blank\">Edge Companion tool<\/a> on PC\/Mac\/Linux.<\/li>\n\n\n\n<li>Start the Companion tool.<\/li>\n\n\n\n<li><strong>Power ON<\/strong> the Radio and Connect the Radio to USB port of your computer. Select &#8220;<strong>USB Storage mode<\/strong>&#8220;<\/li>\n\n\n\n<li>Get the models from the Radio to Companion tool.<br>Select <strong>Read\/write-&gt;Read current models from radio<\/strong>.<\/li>\n\n\n\n<li>Open the OriginHobbies configuration file you downloaded from above. There are many models in the configuration file. Copy the models you need from OriginHobbies configuration window to your Radio&#8217;s configuration window.<\/li>\n\n\n\n<li>Save the models from the Companion tool to the Radio.<br>Select <strong>Read\/write-&gt;Write current models to radio<\/strong>.<\/li>\n\n\n\n<li>Download and Extract the <a href=\"https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/08\/model_images_v2.zip\">model_images_v2.zip<\/a> file into IMAGES folder.<\/li>\n\n\n\n<li>Safely remove the USB disk drive.<\/li>\n\n\n\n<li>Disconnect USB.<\/li>\n<\/ol>\n\n\n\n<h3 class=\"wp-block-heading\">Receiver type<\/h3>\n\n\n\n<h4 class=\"wp-block-heading\">OMP protocol<\/h4>\n\n\n\n<p>OMPHobby M2 EVO and M1 EVO OMP comes with built-in receiver that supports OMP Protocol. In OMP Protocol, the throttle curve is fixed in the helicopter and cannot be adjusted at the Transmitter Radio. OMP protocl supports telemetry for Helicopter battery voltage. Normal, Idle-up1 and Idle-up2 flight modes are assigned by a switch on the Radio transmitter.<\/p>\n\n\n\n<p>Choose model <strong>M1,M2 OMP<\/strong> from the configuration file.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>Channel<\/th><th>Function<\/th><th>Direction<\/th><\/tr><\/thead><tbody><tr><td>1<\/td><td>Aileron<\/td><td><\/td><\/tr><tr><td>2<\/td><td>Elevator<\/td><td><\/td><\/tr><tr><td>3<\/td><td>Collective Pitch<\/td><td><\/td><\/tr><tr><td>4<\/td><td>Rudder<\/td><td><\/td><\/tr><tr><td>5<\/td><td>Throttle Hold<\/td><td><\/td><\/tr><tr><td>6<\/td><td>Flight mode (Normal\/Idle1\/Idle2)<\/td><td><\/td><\/tr><tr><td>7<\/td><td>Stability mode (ON\/OFF)<\/td><td>Inverted<\/td><\/tr><\/tbody><\/table><figcaption class=\"wp-element-caption\">OMP Receiver channel map<\/figcaption><\/figure>\n\n\n\n<h4 class=\"wp-block-heading\">Futaba \/ S-FHSS<\/h4>\n\n\n\n<p>The helicopter supports one one <strong>SBUS<\/strong> port. You can connect a SBUS compatible receiver to this port. It will override the internal OMP receiver. e.g. <a href=\"https:\/\/originhobbies.com\/da\/shop\/radio-control\/radio-receivers\/oshm2055-omp-m2-m1-futaba-satellite-receiver-futaba\/\">OSHM2055 S-FHSS micro receiver<\/a><\/p>\n\n\n\n<p>For M1\/M2 Choose model <strong>M1,M2 SFHSS<\/strong> from the configuration file.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>Channel<\/th><th>Function<\/th><th>Direction<\/th><\/tr><\/thead><tbody><tr><td>1<\/td><td>Aileron<\/td><td>Inverted<\/td><\/tr><tr><td>2<\/td><td>Elevator<\/td><td><\/td><\/tr><tr><td>3<\/td><td>Throttle<\/td><td><\/td><\/tr><tr><td>4<\/td><td>Rudder<\/td><td>Inverted<\/td><\/tr><tr><td>5<\/td><td>Stability mode (ON\/OFF)<\/td><td>Inverted<\/td><\/tr><tr><td>6<\/td><td>Collective Pitch<\/td><td><\/td><\/tr><\/tbody><\/table><figcaption class=\"wp-element-caption\">S-FHSS receiver channel map for M1, M2<\/figcaption><\/figure>\n\n\n\n<p>For M2 MK2 or M2 V3 Pro Choose model <strong>OFS3 SFHSS<\/strong>  from the configuration file.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>Channel<\/th><th>Function<\/th><th>Direction<\/th><\/tr><\/thead><tbody><tr><td>1<\/td><td>Aileron<\/td><td><\/td><\/tr><tr><td>2<\/td><td>Elevator<\/td><td><\/td><\/tr><tr><td>3<\/td><td>Throttle<\/td><td><\/td><\/tr><tr><td>4<\/td><td>Rudder<\/td><td><\/td><\/tr><tr><td>5<\/td><td>Stability mode (ON\/OFF)<\/td><td>Inverted<\/td><\/tr><tr><td>6<\/td><td>Collective Pitch<\/td><td><\/td><\/tr><\/tbody><\/table><figcaption class=\"wp-element-caption\">S-FHSS receiver channel map for OFS3<\/figcaption><\/figure>\n\n\n\n<p>NOTE: If you are not using S-FHSS (Futaba) receiver on the SBUS port then choose the correct the <strong>RF Protocol<\/strong> og <strong>Protocol Sub Type<\/strong> in your TX16S <strong>Model Setup -&gt; Internal RF<\/strong><\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"497\" height=\"176\" src=\"https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/09\/tx16s_edge_binding-edited-1.jpg\" alt=\"\" class=\"wp-image-4978\" srcset=\"https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/09\/tx16s_edge_binding-edited-1.jpg 497w, https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/09\/tx16s_edge_binding-edited-1-300x106.jpg 300w, https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/09\/tx16s_edge_binding-edited-1-18x6.jpg 18w, https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/09\/tx16s_edge_binding-edited-1-416x147.jpg 416w\" sizes=\"auto, (max-width: 497px) 100vw, 497px\" \/><figcaption class=\"wp-element-caption\">RF Protocol and Sub Type<\/figcaption><\/figure>\n<\/div>\n\n\n<h4 class=\"wp-block-heading\">DSM<\/h4>\n\n\n\n<p>The helicopter supports one <strong>Spektrum DSM Satellite <\/strong>port. You can connect a Spektrum satellite receiver to this port. e.g. <a href=\"http:\/\/DSM2 \/ DSMX nano Satellite receiver with bind button\" rel=\"nofollow\">DSM2 \/ DSMX nano Satellite receiver with bind button<\/a>.<\/p>\n\n\n\n<p>Choose model <strong>EVO DSM<\/strong> from the configuration file.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>Channel<\/th><th>Function<\/th><th>Direction<\/th><\/tr><\/thead><tbody><tr><td>1<\/td><td>Aileron<\/td><td>Inverted<\/td><\/tr><tr><td>2<\/td><td>Elevator<\/td><td><\/td><\/tr><tr><td>3<\/td><td>Throttle<\/td><td><\/td><\/tr><tr><td>4<\/td><td>Rudder<\/td><td>Inverted<\/td><\/tr><tr><td>5<\/td><td>Stability mode (ON\/OFF)<\/td><td><\/td><\/tr><tr><td>6<\/td><td>Collective Pitch<\/td><td><\/td><\/tr><\/tbody><\/table><figcaption class=\"wp-element-caption\">DSM Receiver channel map<\/figcaption><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">Radio switch Layout<\/h3>\n\n\n<div class=\"wp-block-image is-resized\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"803\" height=\"707\" src=\"https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/06\/radiomaster-tx16s-switch-layout.jpg\" alt=\"Radiomaster TX16S switch layout\" class=\"wp-image-3795\" srcset=\"https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/06\/radiomaster-tx16s-switch-layout.jpg 803w, https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/06\/radiomaster-tx16s-switch-layout-300x264.jpg 300w, https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/06\/radiomaster-tx16s-switch-layout-768x676.jpg 768w, https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/06\/radiomaster-tx16s-switch-layout-14x12.jpg 14w, https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/06\/radiomaster-tx16s-switch-layout-416x366.jpg 416w\" sizes=\"auto, (max-width: 803px) 100vw, 803px\" \/><\/figure>\n<\/div>\n\n\n<figure class=\"wp-block-table is-style-stripes has-small-font-size\"><table><thead><tr><th>Function<\/th><th>Switch<\/th><\/tr><\/thead><tbody><tr><td>Throttle hold fail-safe<\/td><td>SF<\/td><\/tr><tr><td>Throttle hold<\/td><td>SD<\/td><\/tr><tr><td>Flight mode (Normal, Idle-up1, Idle-up2)<\/td><td>SE<\/td><\/tr><tr><td>Rescue switch<\/td><td>SH (momentary)<\/td><\/tr><tr><td>Attitude hold (auto level) ON\/OFF<\/td><td>SA<\/td><\/tr><tr><td>Volume control<\/td><td>S2 knob<\/td><\/tr><\/tbody><\/table><figcaption class=\"wp-element-caption\">TX16S switch assignment<\/figcaption><\/figure>\n\n\n\n<h3 class=\"wp-block-heading\">Other functions<\/h3>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Flight timer: 4.5 mins, Haptic countdown at 10 seconds<\/li>\n\n\n\n<li>To reset flight timer, both Throttle hold switches should be in Throttle hold.<\/li>\n\n\n\n<li>Voice call on Throttle cut, Throttle active, Flight modes and Stability mode.<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">Binding and pre-flight Check<\/h3>\n\n\n\n<h4 class=\"wp-block-heading\">Binding<\/h4>\n\n\n\n<ol class=\"wp-block-list\">\n<li>Ensure batteries of your Helicopter and Transmitter are sufficiently charged<\/li>\n\n\n\n<li>It is a good idea to remove the main and tail blades of the helicopter to prevent any injury if motors start accidentally.<\/li>\n\n\n\n<li>Choose the correct model on the TX16S.<\/li>\n\n\n\n<li>Ensure throttle hold is engaged.<\/li>\n\n\n\n<li>Plug in the battery into the Helicopter and wait for beeps.<\/li>\n\n\n\n<li>Press and hold <strong>BIND<\/strong> button on helicopter. <mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-vivid-cyan-blue-color\">Blue LED<\/mark> will start flashing. Release the <strong>BIND<\/strong> button.<\/li>\n\n\n\n<li>On the Radio, go to Model setup. Press <strong>MDL<\/strong> button<\/li>\n\n\n\n<li>Scroll down to <strong>INTERNAL RF<\/strong> section<\/li>\n\n\n\n<li>Check that the RF Protocol is selected. If not you have chosen the wrong model.<\/li>\n\n\n\n<li>Press the <strong>BIND<\/strong> button<\/li>\n\n\n\n<li>During binding process, the <mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-vivid-cyan-blue-color\">Blue LED<\/mark> will flash <strong>rapidly<\/strong>. Once binding is complete the <mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-vivid-cyan-blue-color\">Blue LED<\/mark> will be <strong>steady<\/strong>.<\/li>\n<\/ol>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"830\" height=\"295\" src=\"https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/06\/tx16s_edge_binding.jpg\" alt=\"\" class=\"wp-image-3803\" srcset=\"https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/06\/tx16s_edge_binding.jpg 830w, https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/06\/tx16s_edge_binding-300x107.jpg 300w, https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/06\/tx16s_edge_binding-768x273.jpg 768w, https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/06\/tx16s_edge_binding-18x6.jpg 18w, https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/06\/tx16s_edge_binding-416x148.jpg 416w\" sizes=\"auto, (max-width: 830px) 100vw, 830px\" \/><figcaption class=\"wp-element-caption\">Binding<\/figcaption><\/figure>\n<\/div>\n\n\n<h4 class=\"wp-block-heading\">Pre-flight check<\/h4>\n\n\n\n<ul class=\"wp-block-list\">\n<li>The <mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-vivid-red-color\">Red LED<\/mark> indicates <strong>Auto-level<\/strong> mode status.<br><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-vivid-red-color\">Red LED<\/mark> <strong>blinking<\/strong> = <strong>Auto-level OFF<\/strong>.<br><mark style=\"background-color:rgba(0, 0, 0, 0)\" class=\"has-inline-color has-vivid-red-color\">Red LED<\/mark> <strong>steady<\/strong> = <strong>Auto-level ON<\/strong>.<br>Toggle auto-level switch and see it is switching between <strong>Auto-level<\/strong> <strong>ON<\/strong> og <strong>OFF<\/strong>.<\/li>\n\n\n\n<li>Keep <strong>Auto-level OFF<\/strong>.<\/li>\n\n\n\n<li>Move the <strong>aileron\/elevator<\/strong> sticks and check that the swash plate is moving correctly (<strong>left-right<\/strong> og <strong>front-back<\/strong>)<\/li>\n\n\n\n<li>Move the <strong>collective<\/strong> pitch stick and check that the swash plate is moving correctly (<strong>up<\/strong> &amp; <strong>down<\/strong>)<\/li>\n\n\n\n<li><strong>Disengage<\/strong> both<strong> throttle hold and throttle hold fail safe<\/strong> switches, give some collective and check that main rotor is <strong>spinning<\/strong>.<\/li>\n\n\n\n<li><strong>Engage<\/strong> any one <strong>throttle hold<\/strong> and check that main rotor <strong>stops<\/strong>.<\/li>\n\n\n\n<li>Engage <strong>both<\/strong> throttle holds and check that flight timer resets.<\/li>\n\n\n\n<li>Now you can put the rotor blades back on and do a test flight. Good Luck!<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\">Model Customization<\/h3>\n\n\n\n<p>You can customize the model configuration as per your linking. Please refer to explanation of different settings.<\/p>\n\n\n\n<h4 class=\"wp-block-heading\">Switch Assignment<\/h4>\n\n\n\n<p>To change the switch assignments Navigate to Model-&gt;Input Page<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"826\" height=\"294\" src=\"https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/10\/tx16s-model-input-page.png\" alt=\"\" class=\"wp-image-5225\" srcset=\"https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/10\/tx16s-model-input-page.png 826w, https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/10\/tx16s-model-input-page-300x107.png 300w, https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/10\/tx16s-model-input-page-768x273.png 768w, https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/10\/tx16s-model-input-page-18x6.png 18w, https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/10\/tx16s-model-input-page-416x148.png 416w\" sizes=\"auto, (max-width: 826px) 100vw, 826px\" \/><figcaption class=\"wp-element-caption\">Model Input Page<\/figcaption><\/figure>\n<\/div>\n\n\n<p>Scroll to the Function whose switch you want to change. e.g. To change rescue mode switch scroll to Rsq input. Press and hold the Scroll wheel and select EDIT.<\/p>\n\n\n<div class=\"wp-block-image\">\n<figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"827\" height=\"295\" src=\"https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/10\/tx16s-swich-change.png\" alt=\"\" class=\"wp-image-5226\" srcset=\"https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/10\/tx16s-swich-change.png 827w, https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/10\/tx16s-swich-change-300x107.png 300w, https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/10\/tx16s-swich-change-768x274.png 768w, https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/10\/tx16s-swich-change-18x6.png 18w, https:\/\/originhobbies.com\/wp-content\/uploads\/2022\/10\/tx16s-swich-change-416x148.png 416w\" sizes=\"auto, (max-width: 827px) 100vw, 827px\" \/><figcaption class=\"wp-element-caption\">Changing Rescue mode switch<\/figcaption><\/figure>\n<\/div>\n\n\n<p>Scroll to Source and press the scroll wheel button. Then scroll till you find your desired switch. Press the scroll wheel button to confirm.<\/p>\n\n\n\n<h4 class=\"wp-block-heading\">Throttle curves<\/h4>\n\n\n\n<p>For OMP Protocol, there are no throttle curves on the Radio Transmitter as throttle curve is fixed inside the Helicopter. For other protocols, the below curves are used.<\/p>\n\n\n\n<figure class=\"wp-block-table is-style-stripes has-small-font-size\"><table class=\"has-very-light-gray-to-cyan-bluish-gray-gradient-background has-background\"><thead><tr><th>Curve<\/th><th>Curve name<\/th><th>Function<\/th><\/tr><\/thead><tbody><tr><td>CV2<\/td><td>TCn<\/td><td>Throttle curve for Normal mode<\/td><\/tr><tr><td>CV3<\/td><td>TC1<\/td><td>Throttle curve for Idle-up 1<\/td><\/tr><tr><td>CV4<\/td><td>TC2<\/td><td>Throttle curve for Idle-up 2<\/td><\/tr><\/tbody><\/table><figcaption class=\"wp-element-caption\">Throttle curves<\/figcaption><\/figure>\n\n\n\n<h4 class=\"wp-block-heading\">Pitch curves<\/h4>\n\n\n\n<p>For OMP Protocol, there are no pitch curves on the Radio Transmitter as pitch curves are fixed inside the Helicopter. For other protocols, the below curves are used.<\/p>\n\n\n\n<figure class=\"wp-block-table is-style-stripes has-small-font-size\"><table class=\"has-very-light-gray-to-cyan-bluish-gray-gradient-background has-background\"><thead><tr><th>Curve<\/th><th>Curve name<\/th><th>Function<\/th><\/tr><\/thead><tbody><tr><td>CV5<\/td><td>PCn<\/td><td>Collective pitch curve for Normal mode<\/td><\/tr><tr><td>CV6<\/td><td>PC1<\/td><td>Collective pitch curve for Idle-up 1<\/td><\/tr><tr><td>CV7<\/td><td>PC2<\/td><td>Collective pitch curve for Idle-up 2<\/td><\/tr><\/tbody><\/table><figcaption class=\"wp-element-caption\">Pitch curves<\/figcaption><\/figure>\n\n\n\n<h4 class=\"wp-block-heading\">Dead band curve<\/h4>\n\n\n\n<p>OMP Helicopters (with OFS2) have some deadband at center stick at Aileron and Elevator. The dead band curve is mixed with Aileron and Elevator controls to get rid of the dead band. Curve CV12 (DBD) is used as dead band curve.<\/p>\n\n\n\n<p>Helicopters with OFS3 (EVO Mk2 &amp; M2 V3) do not have the deadband. So no need for deadband fix.<\/p>\n\n\n\n<h4 class=\"wp-block-heading\">Config file Revision history<\/h4>\n\n\n\n<pre class=\"wp-block-preformatted\">v8.3: 2025-011-05<br>-Added OFS3 ELRS (external RF)<br>-Added OFS3 SFHSS<br>-Removed OMP M2 R-XSR<br>-Removed OMP M1,M2 R81<br><br>v7.8: 2023-06-14<br>-All: Added Dual-Rate switch and sound<br><br>v7.7: 2023-04-11<br>-R-XSR: added dead-band curve to Ele\/Ail mix. Updated sounds to match other model configs.<br><br>v7.6: 2023-04-01<br>-R-XSR: Added model for R-XSR receiver. Added telemetry top bar for VFAS, mAh, Curr, Curr+<br>-R81: Added telemetry top bar for RSSI and RxBat<br><br>v7.5: 2023-03-16<br>-all: sound track changes.<br>-R81: Added R81 Model<br><br>v7.4: 2023-01-19<br>-FUT\/DSM: Change normal mode throttle curve to 0,5,5,5,5. We want governor to be engaged throughout except full negative.<br><br>v7.3: 2022-12-30<br>-OMP: Flight mode sound function assigned to logic state instead of switch.<br><br>v7.2: 2022-12-02<br>-All: Added Rescue mode on sound.<br>https:\/\/github.com\/EdgeTX\/edgetx-sdcard-sounds\/blob\/main\/SOUNDS\/en\/rscmon.wav?raw=true<br><br>v7.1: 2022-11-08<br>-OMP: Increased normal mode throttle curve 0,85<br><br>v7.0: 2022-10-14<br>-SFHSS\/DSM\/OMP: Streamlined Input, Mixes and Logical Switches so user can easily change switch function just from Input page.<br>-SFHSS\/DSM\/OMP: Lowered low and critical signal warnings to 25, 15.<br>-SFHSS\/DSM\/OMP: Removed PCs curve from pitch mix so pitch doesn't change when switching to stability mode.<br>-OMP: Tamed down Normal mode Pitch Curve so throttle and pitch are more manageable.<br><br>v6.5: 2022-10-04<br>-Increased flight timer to 4:30<br><br>v6.4: 2022-08-22<br>-Changed Normal throttle curve from 0,5,10 to 0,8,15<br>-Changed IU1 throttle curve from 0 flat to 10 flat<br>-renamed OMP M1,M2 SBUS to SFHSS<br><br>v6.3: 2022-08-20<br>-Added M2 EVO picture and changed OMP model image names.<br><br>v6.2: 2022-08-15<br>-Fixed template models pictures and screen layout<br><br>V6.1: 2022-06-21<br>-Changed Normal mode sound from \"nrmmod\" to \"fm-nrm\" as \"nrmmod\" is not available in all languages.<br><br>v6: 2022-06-20<br>-Added deadband curve for Ail &amp; Ele to to OMP M1\/M2 OMP<br>-Added Voice calls for Flight modes and Stability mode.<br>-renamed models from SFHSS to SBUS<br>-Combined separate models to OMP M1,M2 SBUS<br>-Combined separate models to OMP M1,M2 DSM<br>-SBUS\/DSM: Normal mode throttle curve no longer flat, starts from 0<br>-SBUS\/DSM: Normal mode pitch curve -30,0,100<br>-deleted Heli_Spktm_bstx template<br>-deleted OMP D8 frsky model<\/pre>","protected":false},"excerpt":{"rendered":"<p>This guide will show you how to setup your Radiomaster TX16S or any EdgeTX \/ OpenTX Multi-protocol radio for your OMPHobby M1 or M2 Helicopter. If you purchased a RTF Combo or TX16S Radio from us, this setup is already done for you. If you are using OpenTX we recommend that you upgrade your TX16S [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_eb_attr":"","footnotes":""},"class_list":["post-3789","page","type-page","status-publish","hentry"],"jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/Ph9vxs-Z7","_links":{"self":[{"href":"https:\/\/originhobbies.com\/da\/wp-json\/wp\/v2\/pages\/3789","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/originhobbies.com\/da\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/originhobbies.com\/da\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/originhobbies.com\/da\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/originhobbies.com\/da\/wp-json\/wp\/v2\/comments?post=3789"}],"version-history":[{"count":0,"href":"https:\/\/originhobbies.com\/da\/wp-json\/wp\/v2\/pages\/3789\/revisions"}],"wp:attachment":[{"href":"https:\/\/originhobbies.com\/da\/wp-json\/wp\/v2\/media?parent=3789"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}